Overview: BetaFPV Air 5in1 FC (G4 1S 5A Flight Controller for Tiny Whoop | Built-in RX and VTX)

The BetaFPV Air 5in1 FC is designed for individuals who wish to simplify their Tiny Whoop builds with out sacrificing efficiency. It integrates FC, ESC, OSD, VTX and RX all into the identical board. On this evaluate, I’ll dive into the specifics of the BetaFPV Air 5in1 FC, discover its options and efficiency, and focus on whether or not it’s well worth the improve.

A few of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no additional price to you) in case you make a purchase order after clicking on one in every of these affiliate hyperlinks. This helps help the free content material for the neighborhood on this web site. Please learn our Affiliate Hyperlink Coverage for extra info.

Try my tiny whoop and associated accent suggestions: https://oscarliang.com/best-tiny-whoop/

The place to Purchase

You should buy the BetaFPV Air 5in1 FC from:

Equipment included:

• 1 * Air Brushless Flight Controller
• 1 * 2.4g Antenna (Just for the 5in1 Model)
• 1 * Sort-C to SH1.0 Adapter
• 1 * SH1.0 4-Pin Adapter Cable
• 1 * 5.8g VTX Antenna
• 1 * BT2.0 U Whoop Cable Pigtail | 40mm
• 4 * M1.4*4 Self-tapping Screws
• 4 * Rubber Grommets

What Makes the BetaFPV Air 5in1 FC Particular?

The BetaFPV Air 5in1 FC is extremely light-weight, making it excellent for the newest ultralight Air65 and Air75 Tiny Whoops from BetaFPV. Not like the earlier 4in1 board, which required a further exterior receiver, the brand new 5in1 FC integrates the receiver instantly on the board. This integration simplifies the construct course of, reduces the quantity of wiring, and makes repairs simpler.

Whereas the 5in1 FC doesn’t provide a weight benefit over utilizing the 4in1 FC with an exterior receiver, the general price is $5 much less since you don’t have to purchase a separate receiver. The 5in1 board’s integration is especially interesting for these seeking to streamline their builds with out compromising performance.

Specs

4in1/5in1 FC Specs:

• 4in1 Model: FC + ESC + OSD + VTX
• 5in1 Model: FC + ESC + OSD + VTX + RX
• Processor MCU: STM32G473CEU6
• Gyro: ICM42688P (SPI connection)
• Blackbox Reminiscence: 16MB
• Sensor: Voltage & Present
• BEC: 5V 3A
• USB Adapter Connector: JST SH1.0 4-Pin
• Constructed-in 4in1 5A ESC
• FC Firmware: Betaflight_4.5.0_BETAFPVG473
• Mounting Gap Measurement: 26mm x 26mm
• Weight: 2.9g (4in1 Model) / 3.6g (5in1 Model)

ESC Specs:

• Enter Voltage: 1S
• ESC Firmware: Bluejay A_X_5_96KHz_V0.19
• ESC Protocol Help: Dshot300, Dshot600

VTX Specs:

• Output Energy: 25/100/200/400/PIT
• Frequency: 5.8GHz, 48 channels, with Raceband: 5658~5917MHz
• Channel SEL: SmartAudio2.0
• Modulation Sort: FM
• Frequency Management: PLL
• Antenna Port: 50 Ω
• Working Temperature: -10℃~+80℃

RX Specs (5in1):

• RC Hyperlink: ExpressLRS 2.4GHz V3.3
• FC/RX Connection: Serial UART
• Firmware Goal: BETAFPV 2.4GHz AIO RX

VTX Energy Testing

Utilizing the ImmersionRC Energy Meter V2, I examined the VTX RF energy output of the BetaFPV Air 5in1 FC. Listed here are the outcomes:

For comparability, listed below are the measurements for the earlier Air 4in1 FC:

There have been considerations in regards to the BetaFPV Air G4 FC having extreme RF energy output at its 25mW setting, which isn’t splendid for Tiny Whoop racing occasions with strict RF energy guidelines. It appears the 5in1 FC nonetheless has this difficulty, however I’ve solely examined one unit, so I can’t affirm if it is a common drawback.

For these taking part in races, this may very well be a deal-breaker. It’s essential to verify the RF output of your Air FC earlier than attending a type of occasions. Nonetheless, for individuals who fly casually at house or with mates, this shouldn’t be a difficulty. In reality, the 5in1 FC outputs as much as 550mW, which is greater than the 4in1 model, offering higher penetration and vary.

Tiny Whoop Construct

I swapped out the 4in1 FC in my Air65 for the brand new 5in1 FC, and it match completely with none modifications. The digicam and VTX antenna connectors are in the identical places, making certain that the setup stays unchanged.

Pinout diagram:

Conclusion

The BetaFPV Air 5in1 FC is a good improve for Tiny Whoop fanatics who need a streamlined, built-in answer with out the effort of additional wiring. It offers all of the core options wanted for high-performance FPV flights in a light-weight, compact kind. With the added comfort of an onboard receiver, it’s a wonderful selection for these seeking to simplify their builds whereas nonetheless having fun with top-notch efficiency.

Buy the BetaFPV Air 5in1 FC right here:

In the event you plan to race in occasions, be certain to concentrate to the VTX RF energy although as it would exceed the 25mW restrict. The slight value enhance over the 4in1 FC is justified by the added performance, making it a robust contender within the Tiny Whoop flight controller marketplace for informal pilots.